SEMILAC filter

Semilac Replaceable Filters for Collecting Dust During Manicures

Reusable filters are designed for the Semilac 2-in-1 No Dust electric nail drill with a dust collector.

Filter characteristics:

• Filter diameter: 17 cm
• Reusable
• Easy to clean
• Easy replacement
• Made of non-woven fabric

Filter Replacement:

1. Make sure the appliance is turned off, then lift the perforated top cover of the filter.
2. Pull on the fabric strap to remove the entire filter.
3. Insert a new filter and put the lid back on.

Notes:

• Disconnect the power supply when the dust collector is not in use.
• If the filter cover is removed without first disconnecting the power, the device will stop operating and enter safety mode.
• It is recommended to replace the filter every 2–3 months, or immediately if it is damaged.
• To ensure the device works properly, the filter should be cleaned after each manicure session by blowing it out with compressed air or gently shaking it out.
• The filters must not be soaked or wetted.