MARATHON ESCORT III (Balta) SAEYANG + H200 (30,000 rpm)

A manufacturer that knows what it's doing
This nail drill from the Korean company Saeyang is an excellent tool for manicures and pedicures. The company has received numerous awards for its outstanding achievements, and its products are recommended by cosmetologists in the beauty industry. Nearly five decades of experience guarantee that you’ll receive a product of the highest quality.

A model that will serve you well

The Marathon Escort III milling machine is the latest version following the previously released Escort Pro II. It offers the latest technological features and the unique H200 handle. You can be sure of quiet operation and no disruptive vibrations. The speed control mechanism is operated by a crank, and the speed ranges from 0 to 30,000 revolutions per minute. The system is automatically protected against overload.

Intuitive operation

What sets Marathon products apart is their extremely simple operation, which is easy to understand right away. Once you’ve plugged the device in and attached the handle, simply flip the power switch on and then adjust the speed using the knob. There’s also an FWD/REV button on the front of the device to change the direction of the cutter’s rotation. The handle can be placed in the included holder or on the silicone base.

Twist-Lock: Quick bit change

Forget about wrenches and pins! The Twist-Lock handle is a solution that lets you quickly and easily change the bit with a single motion. Turn counterclockwise to unlock, unscrew, and replace the bit. Turn clockwise to lock and secure the bit.

Genuine Marathon product

Warranty: 12 months for the control unit and 6 months for the handle.

Technical Specifications:

• Model: ESCORT III (Control Unit)
• Input: AC 220~240V, 50/60Hz
• Weight: 1,184 g
• Dimensions: W115 x D147 x H71

Handle model: SDE-H200

• Speed: 0–30,000 rpm
• Maximum torque: 2.9 N·cm
• Weight: 150 g
• Size: L129 x Ø22

The set includes:

• Milling Base
• Handle
• Headrest
• Silicone Headrest
• Instructions for Use

USE AND MAINTENANCE:

• Change the direction of rotation to theoppositedirection (reverse)ONLY after the motor has COME TO A COMPLETE STOP,andthen switch theFWD/REV button.
• Always bring the machine to a complete stopbeforechanging the cutter head!
• The diameter of the milling cutter shankis2.35 mm, and its minimum length is10 mm.
• Do not userusted or damaged drill bits; this can cause the micromotor's bearingsto wear out quickly.
• Do not install a wet or dusty drill bit on the micromotor.
• ALWAYS STORE THE MICROMOTOR WITH THE CUTTING BIT INSTALLED.
• Avoid damaging the device.
• NEVER turn on the micromotor without a cutter or nozzle attached!
• NEVER IMMERSE OR WASH THE MICROMOTOR!

WHAT TO DO:

Every day after finishing work, you must:

• Wipe dustoffthe exterior of the device with a soft cloth, using alcohol-based cleaning solutions or a vacuum cleaner.
• Clean the open nozzlewitha brush.
• Performregular maintenance periodically:cleaning, adjustments, brush replacement, and so on.
• The frequency of cleaningdependson how often the equipment is used and the conditions under which it is used.
• The recommended frequency for professional use isat least once every three months.
• Cleaning must be performed by a qualified technician!
• If you notice any initial signs of malfunction, contact the Nailinfinity service center immediately.